These commands are used to configure the USB Host board / IC and will only function when no device is plugged into the board. The following Commands (sent via Serial connection) are available to configure the USB Host Board / IC with the SERIAL software USB GPS runs at 4800 baud, but you want serial data at 9600 baud), then this software and the USB Host board / IC is what you need. You could simply open up the device and gain access to the serial connection directly and that may well be the easiest and cheapest option.īut if you don't want to modify the device (and void the warranty), or if you want data from the device at a different baud rate (e.g. You might think it a little strange that the chip in the device is converting serial to USB, then we are converting it back to serial again. Serial chipsets from the same manufacturers should also work.Īrduino Boards using CDC (UNO, Mega, Leonardo etc)Īs of V1.19, it now supports devices using USB CDC communication. The USB SERIAL Driver has been tested to work with the following chips. This driver software is for products from FTDI, Silicon Labs (SiLabs), Prolific, WCH and for CDC devices. There are several USB chip sets made by a number of companies. You will find this type of chip on products like USB GPS receivers. Many serial devices use a USB chipset so the device can be easily plugged into a computer's USB port. To buy - See the USB Host Board and IC product pages (links on the pictures below) for details on pricing and installing this software.

Please note: This software is free to download but only works on one of our USB boards or chips which must be bought separately (see below).

This is a free software download for our USB Host Board and USB Host IC's ( SOIC, DIP, SSOP).

This software allows you to connect a USB serial device that uses an FTDI, CP210X, PL2303 or CH340G USB chipset, or is a CDC device to the USB Host Board or USB Host IC's and send and receive data.

USB Host - Serial Driver for FTDI, CP210X, PL2303, CH340/1 and CDC

Best usb serial adapter icom remoe